Configuring Ipv6 Mpls L3Vpn Carrier's Carrier - HP 10500 Series Configuration Manual

56 bytes from 2001:1::2, icmp_seq=3 hlim=64 time=0.000 ms
56 bytes from 2001:1::2, icmp_seq=4 hlim=64 time=0.000 ms
--- 2001:1::2 ping6 statistics ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.000/0.200/1.000/0.400 ms

Configuring IPv6 MPLS L3VPN carrier's carrier

Network requirements
Configure carrier's carrier for the scenario shown in
PE 1 and PE 2 are the provider carrier's PE switches. They provide VPN services for the customer
•
carrier.
CE 1 and CE 2 are the customer carrier's switches. They connect to the provider carrier's backbone
•
as CE switches.
PE 3 and PE 4 are the customer carrier's PE switches. They provide IPv6 MPLS L3VPN services for
•
end customers.
CE 3 and CE 4 are customers of the customer carrier.
•
The key to the carrier's carrier deployment is to configure exchange of two kinds of routes:
Exchange of the customer carrier's internal routes on the provider carrier's backbone.
•
• Exchange of the end customers' internal routes between PE 3 and PE 4, the PEs of the customer
carrier. An MP-IBGP peer relationship must be established between PE 3 and PE 4.
Figure 58 Network diagram
Loop0
Customer carrier
Vlan-int12
Vlan-int11
PE 3
Vlan-int11
AS 65410
Device
CE 3
Loop0
Vlan-int12
PE 1
Vlan-int11
AS 100
Vlan-int11
CE 1
Vlan-int12
Loop0
CE 3
Interface IP address
Vlan-int11 2001:1::1/96
Figure
Loop0
Provider carrier
Vlan-int12
Vlan-int11
Vlan-int11
CE 2
Loop0
MP-IBGP
Device
CE 4
216
58. In this scenario:
PE 2
AS 100
Customer carrier
Vlan-int12
Vlan-int12
Vlan-int11
Vlan-int11
CE 4
AS 65420
Interface IP address
Vlan-int11 2001:2::1/96
PE 4