HP 10500 Series Configuration Manual page 22

Step
4. (Optional.) Redistribute
the VPN routes.
5. (Optional.) Configure a
filtering policy to filter
advertised routes.
6. Return to system view.
7. Enter interface view.
8. Enable the IS-IS process
on the interface.
Configuring EBGP between an MCE and a PE
Step
1. Enter system view.
2. Enable BGP and enter BGP
view.
3. Enter BGP-VPN instance view.
4. Specify the PE as the EBGP
peer.
5. Create and enter BGP-VPN
IPv4 address family view.
6. Enable BGP to exchange IPv4
unicast routing information
with the specified peer or
peer group.
7. Redistribute the VPN routes of
the VPN site.
8. (Optional.) Configure a
filtering policy to filter
advertised routes.
9. (Optional.) Configure a
filtering policy to filter
received routes.
Configuring IBGP between an MCE and a PE
Step
1. Enter system view.
Command
import-route protocol [ process-id |
all-processes | allow-ibgp ] [ cost cost |
cost-type { external | internal } | [ level-1
| level-1-2 | level-2 ] | route-policy
route-policy-name | tag tag ] *
filter-policy { acl-number | prefix-list
prefix-list-name | route-policy
route-policy-name } export [ protocol
[ process-id ] ]
quit
interface interface-type interface-number
isis enable [ process-id ]
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer { group-name | ip-address }
[ as-number as-number ]
ipv4-family [ unicast ]
peer { group-name | ip-address }
enable
import-route protocol [ process-id
| all-processes ]
filter-policy { acl-number |
prefix-list ip-prefix-name } export
[ direct | isis process-id | ospf
process-id | rip process-id | static ]
filter-policy { acl-number |
prefix-list ip-prefix-name } import
Command
system-view
16
Remarks
By default, IS-IS does not
redistribute routes from any other
routing protocol.
If you do not specify the route level
in the command, the command
redistributes routes to the level-2
routing table by default.
By default, IS-IS does not filter
advertised routes.
N/A
N/A
By default, no IS-IS process is
enabled.
Remarks
N/A
By default, BGP is not enabled.
N/A
By default, no BGP peer or peer
group is specified.
N/A
By default, BGP does not exchange
IPv4 unicast routing information
with any peer or peer group.
By default, BGP does not
redistribute routes from any other
routing protocol.
By default, BGP does not filter
advertised routes.
By default, BGP does not filter
received routes.
Remarks
N/A