Configuration Level Access - ABB SM500F User Manual

Field Mountable Videographic Recorder
SM500F
6.3 Configuration Level Access – Figs. 6.1 to 6.3
To configure an instrument when 'Configuration security' is set to the factory default setting of 'Password
protected':
1. Access the Configuration Level – see Figs. 6.1 and 6.2 on pages 26 and 27 respectively.
2. Make changes to parameters as detailed in Figs 6.5 and 6.6 (on pages 30 and 31 respectively) and
on-line help.
To configure an instrument when 'Configuration security' is set to 'Internal switch protected':
1. Set the internal security switch to the 'Configuration Level Not Protected' position – see Fig. 6.3.
2. Access the Configuration Level – see Figs. 6.1 and 6.2 on pages 26 and 27 respectively.
3. Make changes to parameters as detailed in Figs 6.5 and 6.6 (on pages 30 and 31 respectively) and
on-line help.
Configuration Level Unprotected
(see section 6.2, page 25)
Continued in Fig. 6.2 on next page
Fig. 6.1 Accessing the Configuration Level
26
Configuration Level
Protected
(see section 6.2, page 25)
Displayed only if
'Security system'
Displayed only if
parameter is set to
'Security system'
'Basic' – see
parameter is set to
on-line help system
'Advanced' – see
on-line help system
6 Configuration
Invalid Password
Entered
Valid Password
Entered
IM/SM500F Issue 10.1