Overview Of The Electrical Circuitry; Overview Of The Electrical Circuitry (Saddle Stitcher Unit) - Canon J1 Service Manual

2
Technology > Basic Constitution > Overview of the Electrical Circuitry (Saddle Stitcher Unit)

Overview of the Electrical Circuitry

The finisher's sequence of operation is controlled by the finisher controller PCB. The finisher
controller PCB is a 16-bit microprocessor (CPU), and is used for communication with the host
machine (serial) in addition to controlling the finisher's sequence of operations.
The finisher controller PCB responds to the various commands coming from the host machine
through a serial communications line to drive solenoids, motors, and other loads.
In addition, it communicates the finisher's various states (information on sensors and
switches) to the host machine through a serial communications circuit.
Overview of the Electrical Circuitry (Saddle Stitcher
Unit)
The sequence of operations used for the saddle stitcher is controlled by the saddle stitcher
controller PCB. The saddle stitcher controller PCB has a microprocessor.
This microprocessor is used to control the sequence of operations and to handle serial
communications with the finisher controller PCB, driving solenoids and motors
in response to the various commands from the finisher controller PCB.
The saddle stitcher controller PCB is also used to communicate the state of various sensors
and switches to the finisher controller PCB in serial.
2
Technology > Basic Constitution > Overview of the Electrical Circuitry (Saddle Stitcher Unit)
F-2-3
2-3
F-2-4
2-3