Canon J1 Service Manual page 104

5
Adjustment > Outline > Main adjustment > The setting of the function
Item
Setting Finisher Buffer Operation Mode
ON/OFF of the swing unit escape operation
*1:Do not set 2 modes at the same time.
*2:Do not set 2 modes at the same time.
*3:Do not set 2 modes at the same time.
5
Adjustment > Outline > Main adjustment > The setting of the function
Bit setting of DSW1 in the finisher
controller PCB
(LV.1)
ON
SORTER > OPTION > BUFF-SW
1 2 3 4 5 6 7 8
- (LV.1)
SORTER > OPTION > SWGUP-SW
Service mode Range Unit
0 to 1
0 to 1
Default Reference
0 " Function Setting Operation"(page 5-15).
0 -
5-6
T-5-2
5-6