Canon J1 Service Manual page 101

5
Adjustment > Outline > Main adjustment > Adjustment item
Item
Adjusting the Height of the Swing Roller
Adjusting the Saddle Staple Position
Adjusting the Saddle Alignment Position
Adjusting the Processing Tray Return Amount
Change of Paper Stack Speed for Non-Buffer Mode
Initializing the RAM on Finisher
Adjusting the Bias Line of Saddle Delivery Paper
5
Adjustment > Outline > Main adjustment > Adjustment item
Bit setting of DSW1 in the finisher
controller PCB
(LV.1)
ON
SORTER > ADJUST > SW-UP-RL
1 2 3 4 5 6 7 8
(LV.1)
ON
SORTER > ADJUST > SDL-STP
1 2 3 4 5 6 7 8
(LV.1)
ON
SORTER > ADJUST > SDL-ALG
1 2 3 4 5 6 7 8
(LV.1)
ON
SORTER > ADJUST > PRCSRET
1 2 3 4 5 6 7 8
(LV.1)
ON
SORTER > OPTION > PRCS-SP3
1 2 3 4 5 6 7 8
(LV.1)
F-5-1
ON
SORTER > FUNCTION > FIN-CON
1 2 3 4 5 6 7 8
-
Service mode Range Unit
-17 to 33 0.2 mm
-3 to 3 0.5 mm
0 to 1 0.5 mm
0 to 5 1.4 mm
0 to 8 50mm/s
- - -
Default Reference
0 " Adjusting the Height of the Swing
Roller"(page 5-8).
0 "Adjusting the Saddle Staple Position"(page
5-10).
0 "Adjusting the Saddle Alignment
Position"(page 5-10).
0 " Adjusting the Processing Tray Return
Amount"(page 5-11).
0 "Adjusting the Processing Tray Return
Speed."(page 5-11).
"Initializing the RAM on Finisher"(page 5-12).
- " Adjusting the Bias Line of Saddle Delivery
Paper"(page 5-12).
5-3
T-5-1
5-3