Canon J1 Service Manual page 125

6
8) Open the front cover.
9) Remove the tape and the cushioning material (Styrofoam) from the stapler.
10)Slide out the stitcher unit to the front.
(only for the Booklet Finisher-J1)
6
Installation > Unpacking > Unpacking Procedure
3
F-6-12
F-6-13
Installation > Unpacking > Unpacking Procedure
11) Remove the stitcher fixing member.(only for the Booklet Finisher-J1)
• 1 screw
x1
12) Put the stitcher back in.
(only for the Booklet Finisher-J1)
13)Close the Finisher Front Cover.
6-8
F-6-14
6-8