Attaching The Labels Etc - Canon J1 Service Manual

6
3) Mount the latch unit lever cover using the 1 screw.
4) Remove the interface cover of the host machine.
5) Connect the finisher to the host machine using the interface cable.
CAUTION:
Before connecting the interface cable, be sure that the host machine is off and its power
plug is disconnected from the power outlet. Otherwise, you can suffer an electric shock.
6
Installation > Installation Procedure > Attaching the Labels etc
F-6-21
F-6-22
Installation > Installation Procedure > Attaching the Labels etc

Attaching the Labels etc

1) Attach the bundled tray labels to the corresponding trays as indicated.
2) Attach the bundled settings labels within the frames of the tray labels as usage.
6-11
F-6-23
F-6-24
6-11