Ethernet Connection - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

15.3 Ethernet Connection

15.3.1 System configuration for connecting to SIMATIC S7-300/400 series
(Ethernet connection type: FETCH/WRITE)
SIMATIC
S7-300/400
series
PLC
Ethernet
Series
*3
Module
CP343-1 IT
SIMATIC
CP343-1
S7-300
CP343-1 Lean
CP343-1 Advanced
SIMATIC
CP443-1 IT
S7-400
CP443-1
*1
*2
*3
*4
15 - 10
15. CONNECTION TO SIEMENS PLC
15.3 Ethernet Connection
Ethernet
Module
Connection cable
Connection cable
Cable model
• 100BASE-TX
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP) of
category 5 or higher
• 10BASE-T
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP) of
category 3 or higher
The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standards.
A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
Product manufactured by Siemens AG. For details of the product, contact Siemens AG.
If the number of GOTs increases, the communication becomes highloaded, and it may affect the communication performance.
Maximum
*1
segment
Option device
*2
length
100m
- (Built into GOT)
Communication driver
GOT
Ethernet(
GOT
Model
SIEMENS S7
), Gateway
Number of connectable
equipment
When PLC:GOT is N:1
16 PLCs or less for 1 GOT
When PLC:GOT is 1:N
The following shows the
number of GOTs for 1 PLC
*4
32 or less
(recommended
to 16 or less)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents