Panasonic KX-TAW848 Features Manual page 40

1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
FWD for ICD
Group
[Button Status—FWD/DND Button]
A FWD/DND button shows the current status as follows:
Red on
Slow red flashing
Off
The status indicated by the "on" and "flashing" patterns can be changed through system
programming.
[Button Status—Group FWD Button]
A Group FWD button shows the current status as follows:
Slow red flashing
Off
[Mode Change]
When either the FWD or DND feature is assigned, pressing the FWD/DND button changes
the on/off setting alternately. When both features are assigned simultaneously, pressing
the button changes the settings as follows:
Note
• When intercom calls are set to be handled differently from CO line calls (forwarding type,
forward destination, DND on/off), we recommend establishing separate buttons for both
FWD/DND—Internal and FWD/DND—External, and/or Group FWD—Internal and Group
FWD—External, because:
a)
40 Feature Guide
Type
Group FWD—Internal
Group FWD—External
Group FWD—Both
Light Pattern
DND on
FWD on
FWD/DND off
Light Pattern
FWD on
FWD off
FWD DND
Pressing the FWD/DND button (fixed button) in idle status will produce one of the
following results, selected through system programming:
When in FWD/DND Setting Mode:
Pressing the button will enter personal programming mode for the FWD/DND setting.
When in FWD/DND Cycle Switch Mode:
Pressing the button will cycle the settings as shown above in [Mode Change].
A FWD/DND button customized on a flexible button is always in FWD/DND Cycle
Switch mode, and the mode cannot be changed.
the light patterns of the FWD/DND—Both button (including FWD/DND button [fixed
button]) and the Group FWD—Both button will indicate the setting for either CO line
Works for incoming intercom calls
Works for incoming CO line calls
Works for all incoming calls
Status (default)
Status (default)
Off
Description