Time Service-Week Table [2-5-1] - Panasonic KX-TAW848 Features Manual

4.2 System [2]
Programming References
•
•
Visual Caller ID Display Timer
Specifies the length of time the Caller ID number, with the Call Waiting tone offered by an
analog line from the telephone company, is shown on the display. The Caller ID number flashes
on the display twice for five seconds at 15-second intervals.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
4.2.8 Time Service—Week Table [2-5-1]
A specific time mode (day, night, lunch, or break) can be selected for operation depending on
the time of the day. The time mode can be switched either automatically or manually. Select
the desired switching mode from the Time Service Switching Mode list.
The number of a Time Table corresponds to the number of a tenant. Select the desired Time
Table from the Time Table No. list.
When in the Automatic Switching mode, time modes of the tenant are switched as programmed
in the corresponding Time Table. Manual switching is possible only from an authorized
extension (determined by COS).
Day / Lunch / Night
Time Tables containing day, lunch, and night start times can be programmed for each day of
the week.
Day 1 Start—Setting
Enables the setting of the Day 1 start time.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
Day 1 Start—Hour
Specifies the hour of the Day 1 start time.
274 Feature Guide
4.6.1 Speed Dialing & Caller ID—Main Table [6-1-1]
4.6.2 Speed Dialing & Caller ID—Caller ID Modification [6-1-2]
30 s
0–250 s
1.1.3.3 Call Waiting
None
Enable
Disable, Enable
2.2.4 Time Service
4.2.14 Class of Service—COS Settings [2-7-1]
4.3.3 Extension Group [3-2]