Panasonic KX-TAW848 Features Manual page 17

When the original destination is:
• ICD Group
• PS Ring Group
• VM Group (DTMF/DPT)
• External Pager (TAFAS)
• DISA
• Analog Remote Maintenance
• Idle Line Access no. + Phone no.
• CO Line Group Access no. + CO
Line Group no. + Phone no.
* Intercept Routing will redirect a call only if the Direct Inward System Access (DISA) line is
busy. Once a call reaches the destination extension using the DISA feature, the call can
be redirected to the Intercept Routing destination assigned to that extension.
[Available Intercept Destination]
The following can be used as intercept destinations:
Wired Extension (PT/SLT)
PS
ICD Group
PS Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog Remote Maintenance
Idle Line Access no. + Phone no.
CO Line Group Access no. + CO Line Group no. +
Phone no.
Conditions
• If the intercept destination is busy or in DND mode and therefore cannot receive the
call:
a)
When the call was intercepted via Intercept Routing—No Answer, the call is sent back
to the original destination and continues to ring at the original destination until
answered.
Intercept Destination
The Available Intercept Destination is:
The ICD Group Overflow destination assigned to
the group ( Destination for Overflow Time
Expiration [625]) ( 1.2.2.5 Overflow Feature)
The destination assigned to the CO line group
carrying the call ( CO Line Group Intercept
Destination [470])
The destination assigned to the CO line group
carrying the call* (
Destination [470])
Not assignable (Intercept Routing is not available.)
Availability
1.1 Incoming Call Features
CO Line Group Intercept
Feature Guide 17