4.1 Configuration [1]
Programming References
•
•
High Speed Pulse Dial—Pulse % Break
Specifies the % break for a high speed pulse dial. This is the ratio between the break (on-hook)
signal and make (off-hook) signal in a pulse dial.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
High Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a high speed pulse dial. High Speed
Pulse Dial—Pulse % Break on this screen determines the value that can be specified here.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
High Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a high speed pulse dial. High Speed Pulse
Dial—Pulse % Break on this screen determines the value that can be specified here.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
Pulse Type
Selects the type of pulse dial transmission appropriate to your area.
242
Feature Guide
4.1.1 Slot [1-1]
4.1.9 LCO Port [1-4]
60 %
Other, 60 %, 67 %
None
4.1.1 Slot [1-1]
4.1.9 LCO Port [1-4]
32 ms
4 × n (n=4–18) ms
None
4.1.1 Slot [1-1]
4.1.9 LCO Port [1-4]
20 ms
4 × n (n=3–15) ms
None
4.1.1 Slot [1-1]
4.1.9 LCO Port [1-4]