4.4 Extension [4]
Programming References
•
Incoming Call Wait Timer for Extension Caller ID
Specifies the length of time the ringing for a call is delayed when the call follows immediately
after the previous unanswered call. When receiving two calls in quick succession (e.g., when
a call waiting in a queue is directed to an extension immediately after the previous call stops
ringing), some SLTs require a pause, after the first call stops ringing, to receive the second
call's Caller ID information.
Note that the setting of this parameter is only effective when a resource for sending extension
Caller ID is assigned in Extension Caller ID Resource-1, 2 for the port in Extension Caller
ID [2-11].
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
FWD / DND Reference
Call Forwarding (FWD) and Do Not Disturb (DND) settings for each extension can be referred.
FWD and DND settings can be programmed separately for each extension in Wired
Extension—FWD/DND [4-1-2].
Slot
Indicates the slot position of each extension card (reference only).
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Port
Indicates the port number (reference only).
Default
Value Range
Feature Guide References
Feature References
•
380
Feature Guide
4.2.25 Extension Caller ID [2-11]—Extension Caller ID Resource-1, 2
0 s
0–15 s
1.16.1 Caller ID
4.2.25 Extension Caller ID [2-11]—Extension Caller ID Resource-1, 2
Current slot number
Slot number
None
4.1.1 Slot [1-1]
Current port number
Port number
None