Panasonic KX-TAW848 Features Manual page 142

1.19 Voice Mail Features
* The DTMF commands here are the default commands used by the PBX. Program either
the PBX or your VPS so that these settings match. Note, however, that non-Panasonic
VPSs may use different feature names.
[DTMF Commands Sent to the VPS]
FWD
Intercept Routing
Transfer (pressing the VM Transfer button and
dialing an extension no.)
Pressing the MESSAGE button or similar
operation
* The DTMF commands here are the default commands used by the PBX. Program either
the PBX or your VPS so that these settings match.
[Example of a DTMF Command Sent to the VPS]
CO Line Call
Extn. 101
142 Feature Guide
VPS Access Method
Answer by Mailbox
AA
None
Answer by Mailbox
AA
None
The PBX sends the DTMF command:
Switch to VM service command
PBX
A CO line call is directed to extension
101, then redirected to the VM service
of the VPS via Intercept Routing.
DTMF Command Sent to VPS*
When VM (DTMF)
Group is in VM
Service Mode
#6 + 101
Mailbox number
VPS
In AA
Service Mode
Mailbox
101
When VM (DTMF)
Group is in AA
Service Mode
H #6 + H
#8
No command is sent.
H #6 + H
#8
No command is sent.
H #6 + H
H #6 +
#8
#8
H