Getting Into The Operating Levels - Philips V24CT User's Reference Manual

Getting into
Before you can start to make adjustments or changes to the parameters or
the
perform a procedure, you need to know how to get into the operating
Operating
levels and how to navigate through the selections. Follow the procedures
Levels
below to get into the Selection and Task Windows.
Selection Window
For example, to get into the Noninvasive Blood Pressure (NBP) Task
Window:
Task Window
There are two ways to get into a parameter Task Window, either:
Getting into other Task Windows for functions like Other Patients or
Monitor Setup is only possible via the Selection Window. In the Task
Window there are separate keys. The selections that are currently active
for the parameter or function you have chosen are indicated by yellow
labeling. In addition the selected keys appear to be "pushed in" on the
screen.
1. Press the blue-labeled hardkey for the function you require.
2. When you get into a Selection Window, the bottom line is always
active. Select the line with the parameter or function you require, by
pressing the same hard key again that got you into the selection
window, or use the arrow keys if they are illuminated.
3. Press either the softkey corresponding to the parameter or function
you require or
Confirm
1. Press the hardkey
2. If it is not already active, select the line containing NBP by pressing
again.
Module Setup
3. Press the softkey
Refernce
Task Window.
via the Selection Window,
or
by pressing the Setup key on the parameter module which gets you
directly into the Task Window.
. This gets you into the Task Window.
Module Setup
to get into the Noninvasive Blood Pressure
NBP
Pts
The CMS and V24 and V26 Patient Monitors 1-25
Operating Levels