Configuring
Monitor Setup
Alarm
Recordings
Note—
the ECG alarm recording setting is displayed in the Alarm Recording On/
Off Task Window as RED/YELLOW. This setting cannot be changed
unless you choose a bedside recorder (either a Plug-In or 4-channel
bedside).
Note—
Mode.
Recordng Setup
Select Parametr
1. Press
2. Press
Change AlarmRec
Yellow, Off).
3. Press
All Rec On
conditions.
All Rec Off
4. Press
If delayed/alarm recordings are being sent to the central recorder,
The AlarmRec On/Off function must be enabled in Configuration
AlarmRec On/Off
On/Off
to highlight a parameter to change.
to select the severity (Red, Red/Yellow,
to enable recordings for all red and yellow
for no alarm recordings.
Alarm Recording
On/Off
Recording Functions 6-13