Instructions For Changing The Db Admin User - ABB 800xA User Manual

Instructions for Changing the DB Admin User

6.
7.
8.
The names of the vault entries start with "CPIMS/" or "CPIMS_DC/"
Instructions for Changing the DB Admin User
1.
2.
3.
4.
This step is optional if the logged on user is the adminuser
180
Start RTDB
If this was the 800xA History Server node, force re-registration of the DCN
nodes (this is needed that the new adminuser will know the access information
to the DCN nodes)
a. praotstx %app_dsn% -sql "delete from simpleconfig where sectionname
like 'DatabaseNodes_%' and KeyName like 'Added_%'"
b. Restart RTDB-Scheduler in all 800XA History DCN nodes
Recommendation: clean up the Vault entries for the old adminuser
Log on with the user account that was originally used for installing RTDB
Store the name and password of the new account to the Windows vault entry
"CPIMS/DBADMIN" by navigating to Control Panel > User Accounts >
Credential Manager
Add the user to the RTDB-Admin group by running:
"%app_root%\Config\Security\APP_Create_users.bat"
If this was the 800xA History Server node, you need to tell the new user name
and password to each data collector node:
a. Log on to the data collector node with the user account that was originally
used for installing RTDB
b. Update the vault information for entry "CPIMS/MAIN_DBADMIN"
Navigate to Control Panel > User Accounts > Credential Manager
c. Run the below command:
%app_root%\config\featureinstall\APP_Give_Setup_Answers_to_ad
minuser.bat
Appendix H User Name Update Procedure
2PAA107563-600 B