Change Of Consistency Controller Network Ip - ABB 800xA User Manual

Appendix A IP Address Change
"%app_root%\config\featureinstall\APP_TimedTask_HierarchicalCpmPlusK
M_activate_after.bat"

Change of Consistency Controller Network IP

Perform the following steps to change the IP address of Consistency Controller
Network (CCN). These steps are applicable for High-Availability (HA) History
Server configurations only.
1.
2.
3.
%app_root%\setup\APP_Config_CC.bat
Figure 79. Command Prompt
The cmd editor shows the previous CCN IP and asks to provide the new CCN IP.
4.
The update of CCN IP completes and command prompt returns.
5.
2PAA107563-600 B
SET "ANS_P_MAINSERVERIP=<newNLBCommonIP>"
c. Save and close the file.
d. Open Command Prompt and run the following command to update
DatabaseNodes table.
Stop RTDB Services on both HA Servers. Stop the Replica Node and then the
First Node.
In both the HA Servers, change the IP address of the network adapter that was
assigned for CCN.
On both History Servers, run the following in the command prompt:
Type the new CCN IP and press Enter button.
Restart the HA Servers in the order of First Node and Replica Node.
Change of Consistency Controller Network IP
131