Copy Volume Dialog; Copy Volume Specification - ABB 800xA User Manual

Maintaining Archive Media
This displays the Copy Volume dialog,
copy volume parameters as described in
Figure 72. Copy Volume Dialog
Field
Source Volume ID
Destination Volume ID
Destination Path
Destination Volume
Label
Overwrite Timeout
Include Archives
118
Table 16. Copy Volume Specification
Automatically filled in based on the volume whose aspect is
selected.
Enter the Volume ID for the new copy. This is typically the same as
the Source Volume ID.
Enter the full path to the location (drive\folder\folder...) where the
copy will be created.
Used to specify a new volume label. The default is to use the label
of the volume being copied.
Used to specify a new overwrite timeout. The default is to use the
overwrite timeout of the volume being copied.
Used to specify the range of archive entries to copy.
Section 7 Configuring Archives
Figure 72. Use this dialog to specify the
Table 16. Click OK when done.
Description
2PAA107563-600 B