Archive Volume Aspect Information - ABB 800xA User Manual

User Interface for Managing Archive Data
Table 10. Archive Functions for Archive Volume Aspect (Continued)
Verifying Signatures for
a Volume
Showing Signature
Information for a Volume
Copying Volumes
All functions are through the Actions button that is available in the aspect view of
Archive Volume Aspect.

Archive Volume Aspect Information.

organized in three parts. The top section provides information for the selected
volume,
volume,
were archived for the selected entry are shown in the bottom section,
Field
Volume ID
Volume Label
Volume State
106
Field
Used to verify electronic signatures on a
volume to determine whether or not the
contents of the volume have been altered
without authorization.
Used to view the signature information for a
volume.
Used to manually back up archive volumes
Table 11. The middle section lists the entries currently stored on this
Table 12. When an entry is selected in the middle section, the logs that
Table 11. Volume Information - Top Section
For scheduled archive, the volume ID is auto-
generated based on the configured Next label and
Volume Format attributes. For manual archive, the
volume ID must be specified in the Initialize Volume
dialog.
Optional descriptor to further identify the volume.
Indicates the volume state. Possible states are:
No Media, Not Initialized, Valid, and Full
additional information for Valid includes:
Fully Published or Partially Published
and if the media is from HPUX, HP-UX will be shown.
Section 7 Configuring Archives
Description
The information provided on this aspect is
Description
Table 13.
2PAA107563-600 B