Installation Environment; For N15K0, X18K5 And Smaller; For N18K5, X22K0 And Larger; Chapter 2 Installation And Wiring - GE VAT2000 Instruction Manual

Chapter 2 Installation and Wiring

• Always transport the product with an appropriate amount according to the products weight.
Failure to observe this could lead to injuries.
• Install the inverter, dynamic braking unit and resistor, and other peripheral devices on non-combustible
material such as metal.
Failure to observe this could lead to fires.
• Do not place the product near inflammable items.
Failure to observe this could lead to fires.
• Do not hold the front cover while transporting the product.
Failure to observe this could lead to injuries from dropping.
• Do not let conductive materials such as screws or metal pieces and inflammable materials such as oil
enter the product.
Failure to observe this could lead to fires.
• Install the product in a place that can withstand the weight of the product, and follow the instruction
manual.
Failure to do so could lead to injuries from dropping.
• Do not install and operate an inverter that is damaged or that is missing parts.
Failure to observe this could lead to injuries.
• Always observe the conditions described in the instruction manual for the installation environment.
Failure to observe this could lead to faults.

2-1 Installation Environment

Observe the following points when installing the inverter.
1) Install the inverter vertically so that the wire lead-in holes face downward.
2) Make sure that the ambient temperature is -10ºC to 50ºC.
3) Avoid installation in the following environment.
• Places subject to direct sunlight
• Places with oil mist, dust or cotton lint, or subject to salty winds
• Places with corrosive gas, explosive gas or high humidity levels
• Places near vibration sources such as dollies or press machines
• Places made of flammable materials such as wood, or places that are not heat resistant
4) Ensure ventilation space around the inverter.
5 0 m m

For N15K0, X18K5 and smaller

2. Installation and Wiring
VAT2 00 0
5 0 m m
CAUTION
VAT2 00 0
5 0 m m

For N18K5, X22K0 and larger

2-1
5 0 m m