Samsung iDCS500 Manual page 19

Switch Control Processor (SCP)
The Switch Control Processor (SCP) is installed in slot 9 of the KSU and reduces the available
universal card slots to eight. The SCP card is required when the system is to be expanded beyond a
single cabinet. The SCP card has positions for three optional daughter boards. The first daughter
board position (LOC1) can support one of three types of daughter board, a Multi-Frequency Module
(MFM), a Switch/Conference Module (SCM) or an R2/CID Module (RCM). The second daughter
board position (LOC2) can support the MFM, the SCM, the RCM or the MISC. The third daughter
board position (LOC3) can support one of the three types of daughter board, a Multi-Frequency
Module (MFM), a Switch/Conference Module (SCM) or an R2/CID Module (RCM).
SWITCH CONTROL PROCESSOR (SCP) DAUGHTER BOARD CAPABILITIES
Position
LOC1
LOC2
LOC3
NOTE: Only one of any type of daughter board may be installed on any processor card.
Local Control Processor (LCP)
The Local Control Processor (LCP) card is installed in a dedicated processor slot, slot 10, of each
Expansion KSU and does not reduce the available universal card slots of that cabinet. The LCP card
has positions for three daughter boards. The first daughter board position (LOC1) can support one
of two types of daughter board, a Multi-Frequency Module (MFM), or an R2/CID Module (RCM).
The second daughter board position (LOC2) can support the MFM, the RCM or the MISC. The third
daughter board position (LOC3) can support one of two types of daughter board, a Multi-Frequency
Module (MFM), or an R2/CID Module (RCM).
LOCAL CONTROL PROCESSOR (LCP) DAUGHTER BOARD CAPABILITIES
Position
LOC1
LOC2
LOC3
NOTE: Only one of any type of daughter board may be installed on any processor card.
Type of Daughter Boards allowed per position
MFM, SCM, RCM
MFM, RCM, and MISC
MFM, RCM
Type of Daughter Boards allowed per position
MFM, RCM
MFM, RCM, and MISC
MFM, RCM
2-3