Parking Brake Disc - Polaris RZR XP 1000 Service Manual

BRAKE SYSTEM

Parking Brake Disc

Disc Inspection
Measure the brake disc with a micrometer. If the
thickness of the disc is less than specified, replace the
brake disc (see Chapter 9 – Disc Replacement, page
).
Disc Replacement
1. Remove the parking brake caliper from the disc (see
Chapter 9 – ).
2. Using a 1/2" socket and ratchet, remove the brake
disc retaining bolt and flat washer.
3. Remove the disc from the transmission shaft.
4. Install the new brake disc. Install the mounting bolt
and flat washer. Torque the mounting bolt to
specification.
Parking Brake Disc Mounting Bolt:
14 ft-lb (20 Nm)
9.16
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.