Polaris RZR XP 1000 Service Manual page 150

ENGINE / COOLING SYSTEM
24. Torque the oil sump cover bolts in sequence to
specification. Repeat the sequence to verify final
torque.
Oil Sump Cover Bolts:
M8 Bolts:
26 ft-lb (35 Nm)
M6 Bolts:
106 in-lb (12 Nm)
25. Reinstall the crankcase drain plug if previously
removed. Torque drain plug to specification.
Crankcase Drain Plug:
12 ft-lbs (16 Nm)
3.74
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
26. Reinstall the oil cooler
new O-rings upon installation. Torque fasteners to
19
specification
Oil Cooler bolts:
7 ft-lbs (10 Nm)
27. Proceed to Flywheel Installation, page 3.76 and
then Cylinder Head Installation, page 3.78.
, if previously removed. Use
18