HP HSR6800 Installation Manual page 29
Hide thumbs
Also See for HSR6800:
- Configuration manual (478 pages) ,
- Command reference manual (170 pages) ,
- Installation manual (146 pages)
Table of Contents
Advertisement
Figure 25 Removing the power module connector.
2.
Connect the end marked with "– " to the negative terminal (–) on the power module connector and
fasten the fastening screw.
3.
Connect the end marked with "+"to the positive terminal (+) on the power module connector and
fasten the fastening screw.
Figure 26 Attaching the power cords to the power module connector
4.
Insert the power module connector in right direction into the power module, and fasten the captive
screws with a Phillips screwdriver.
23
Advertisement
Table of Contents
Troubleshooting
