Installing The Router; Installation Flow; Installing A Cable Management Bracket - HP HSR6800 Installation Manual

Installing the router

Installation flow

Figure 4 Installation flow
Unpacking the router
Install a cable management bracket
（only on HSR6808 router）
Install the router to a 19-inch rack
Ground the router
Install a power module
Install an MPU and a switching fabric
Install an LPU
Install a HIM/MIM
Install a CF card
Install optional components
Connect the power cord

Installing a cable management bracket

The cable management brackets of the HSR6802 and HSR6804 are provided with mounting brackets.
You need to install a cable management bracket for an HSR6808 router.
To install a cable management bracket:
1. Face the front of the router.
2. Align the screw holes on the cable management bracket with the screw holes on the front panel of
chassis, and use a Phillips screwdriver to fasten the screws.
Start
module
End
10