Resizing Originals By Entering A Scaling Value (Mac Os) - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
12
F
Click Scaling and enter 120.
•
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and
right edges of the paper will not be printed.
Note
• If the original size after enlargement or reduction is
smaller than the paper size, the original is printed in the
upper-left corner. In this case, you can center originals
by selecting
13
Confirm the print settings and print as desired.
•
For tips on confirming print settings, see "Confirming Print Settings ."
Note

Resizing Originals by Entering a Scaling Value (Mac OS)

Resizing Originals by Entering a Scaling Value (Mac OS)

This topic describes how to enlarge originals before printing by entering a scaling value, based on the following exam-
ple.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
Paper type: Plain Paper
•
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
User's Guide
E
Print Centered on the Layout sheet.
Resizing Originals by Entering a Scaling Value (Mac OS)
P.154
➔
63