Canon imagePROGRAF iPF6400SE User Manual page 59

iPF6400SE
1
B
This sets the Format for and
• The configuration method varies depending on the OS
and application software you are using.
Note
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attributes
dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper
part of the printer driver displayed when you select Print
from the application software menu.
2
Select the printer in the
3
F
In the Paper Size list, click the size of the original. In this case, click ISO A4.
4
If you configured the settings using the Page Attributes dialog box, click
then select Print from the application software menu.
5
Access the Main pane.
6
A
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
7
Make your selection in the
8
Make your selection in the
User's Guide
C
Paper Size.
A
Printer list.
E
Print Target list.
F
Print Quality list.
Resizing Originals to Fit the Roll Width (Mac OS)
F
OK to close the dialog box, and
59