Canon imagePROGRAF iPF6400SE User Manual page 481

iPF6400SE
System
Keep Paper Size
Setup
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Use RemoteUI
Reset PaprSetngs
Show Job Log
Prep.MovePrinter
User's Guide
Setting Item Description, Instructions
Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of
the printer driver if the latter is smaller, which may prevent
text or images in the margin from being printed.
Choose Off to give priority to margin settings. The larger
value is used if the margin specified in the printer driver
does not match the margin in the printer menu.
Specify whether to trim the leading edge of the currently re-
tracted roll when the roll is advanced. Cut the edge if you
are concerned about any marks left on the roll when the roll
is left in the retracted position.
Specify On to have rolls cut when printing begins after
Sleep mode or when the power is restored. Selecting Auto-
matic will trim the edge when the roll has been in the re-
tracted position for two days or more.
Choose On to have the printer automatically execute the
Advanced Adj. operations after you replace the Printhead.
(See "Automatic Adjustment to Straighten Lines and Col-
ors.")
P.552
➔
In Frequency, specify the timing for automatic checks of
nozzle clogging. Choose Standard to have the printer ad-
just the timing for checks based on the frequency of nozzle
use. Choose 1 page to check once per page. Choose 10
pages to check once per 10 pages. Choose Off to not exe-
cute check.
If On is selected in Warning, a warning may be displayed
on the Control Panel depending on the result of the nozzle
check.
Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
Restores settings that you have changed with Media Con-
figuration Tool to the default values.
Selecting Off prevents display of the log in Job Menu >
Job Log. Additionally, the log is not printed if you choose
Job Menu > Print Job Log. Note that because job logs are
not collected, the Status Monitor accounting functions will
not work correctly.
When transferring the printer to another location, choose
the level of transfer and follow the instructions on the
screen. (See "Preparing to Transfer the Printer.")
Menu Settings
481
P.600
➔