Changing The Object Size; Moving An Object - Canon imagePROGRAF iPF6400SE User Manual

Changing the Object Size

Changing the Object Size

Changing the Object Size
You can change the object size by means of mouse operation or by specifying a scaling value.
•
The vertical-to-horizontal ratio remains unchanged when the object is enlarged or reduced.
Note
Resizing by means of mouse operation
1
Select an object.
2
Place the pointer at a corner of the selection box
around the object to show the arrow handle, and drag
this handle to change the object size.
Resizing by specifying a scaling value
1
Select an object.
2
Open the Format Dialog Box
3
Use Scaling to set the magnification for enlargement or reduction. You either enter numbers directly.
Note
4
Click the OK button.

Moving an Object

Moving an Object

You can move the object position.
1
Select an object.
2
Place the pointer inside the selection box of the object
to show the crosshair handle, and drag it to move the
object.
330
P.328
➔
•
You can input between 25 and 400.
•
You can change the numbers by clicking either ▲ button or ▼ button.
.
iPF6400SE
User's Guide