Installation Procedures - Canon imagePROGRAF iPF6400SE User Manual

Installation Procedures

Installation Procedures

Installation Procedures
The Media Configuration Tool installation screen appears when you start the installation of a new version of the Media
Configuration Tool. The installation procedure started from this screen is described below.
•
When you install the printer driver from the User Software CD-ROM, the Media Configuration Tool is also installed
and the media information is also configured. The following procedure is therefore not normally needed. Perform the
Important
following procedure if you are installing the Media Configuration Tool without using the User Software CD-ROM, such
as by downloading the latest version of the Media Configuration Tool from the Canon website.
•
You must be logged in as Administrator when installing software in Windows.
1
Start the Media Configuration Tool installer.
Click the Next button.
2
The next screen presents selections for the country or area
where the printer is used.
Select a country or territory then click the Next button.
3
The License Agreement is displayed.
If you accept the agreement, click Yes.
394
iPF6400SE
User's Guide