Reducing Dust From Cutting Rolls; Roll Holder Set - Canon imagePROGRAF iPF6400SE User Manual

Reducing Dust from Cutting Rolls

Reducing Dust from Cutting Rolls

Reducing Dust from Cutting Rolls
For media such as Backlit Film that are more likely to generate debris when cut, select CutDustReduct. > On in the
Paper Menu of the Control Panel. This option reduces debris from cutting by printing black lines at the leading and
trailing edges of documents. It may help prevent Printhead damage. You can specify for CutDustReduct. to be activa-
ted for particular types of paper.
•
Do not set CutDustReduct. to On for paper that wrinkles easily, such as Plain Paper or lightweight paper. This may
impair cutting and cause paper jams.
Important
•
Borderless printing is not available when CutDustReduct. is set to On. To use borderless printing, select CutDus-
tReduct. > Off.
Set CutDustReduct. to On as follows.
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Paper tab (
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
5
Press ▲ or ▼ to select CutDustReduct., and then press the OK button.
6
Press ▲ or ▼ to select On, and then press the OK button.

Roll Holder Set

Roll Holder Set

Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-25 is for
use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core. For borderless
printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
384
• Roll Holder Set RH2-25
).
•
If the Tab Selection screen is not displayed, press the Menu button.
P.363
➔
iPF6400SE
User's Guide