Updating The Firmware - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
7
Install the software.
Note that the driver installation procedure varies depending on the type of connection.
•
When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you
reinstall the printer.
Important
In this case, be sure to reconfigure the printer's IP address.
8
Load the Roll Media on the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
9
Load the Roll Media in the printer.
(See "Loading Rolls in the Printer.")

Updating the Firmware

Updating the Firmware
Update the printer firmware to take advantage of new and improved printer functions.
Confirming the firmware version
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
•
If the Tab Selection screen is not displayed, press the Menu button.
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Printer Info, and then press the OK button.
User's Guide
P.363
➔
P.365
➔
).
Updating the Firmware
607