Groomer Reel Mechanical Problems - Toro Greensmaster 3150 Service Manual

Groomer Reel Mechanical Problems

Problem
The groomer reel rotates when it is
in the raised, transport position.
No rotation of the groomer reel.
The turf is damaged or has uneven
grooming.
Greensmaster 3150
Possible Causes
The groomer reel should rotate
whenever the cutting reel is en-
gaged.
Seized groomer reel or idler bear-
ing(s) in groomer side plate(s).
Broken or damaged idler spring.
The groomer belt is worn, broken or
damaged.
The groomer reel blades are bent,
damaged or missing.
The groomer reel shaft is bent or
damaged.
Grooming depth is not equal on
both ends of groomer reel.
Page 10.1 – 5
Correction
Normal operation.
Identify and replace faulty bear-
ing(s).
Replace spring.
If the belt slips, it probably is worn
and must be replaced.
Repair or replace belt if necessary.
A broken or worn belt could be the
result of improper belt routing or
seized bearings in groomer assem-
bly.
Repair or replace blades if neces-
sary.
Replace groomer reel shaft.
Adjust depth if necessary. Check
and adjust cutting unit set up (level
bedknife to reel, level rear roller to
reel, set height–of–cut, etc.).
Groomer (DPA Cutting Unit) (Rev. A)