Toro Greensmaster 3150 Service Manual page 167

Specifications
Height- -of- -Cut : 3/32 (0.094) in. to 3/4 (0.75) in.
Clip Frequency and Optimum Height of Cut Range:
.
Model No Clip (max.)
04468 0.25 in.
04450 0.18 in.
Roller Adjustment:
Front: Micrometer hand adjustment with bolted clamp
lock (1 turn = 0.025 in. height of cut change).
Rear: Roller brackets allow adjustment for different
heights of cut. Screw adjustment for leveling.
Bedknife to Reel Adjustment: Bedknife adjusts
against reel with positive adjustment control knob lo-
1. Lift bail
2. Height of cut adjustment knob
3. Height of cut adjustment locknut
Greensmaster 3150
cated at center of bedbar. Adjustment knob contains
detent with .001 in. movement of bedknife for each in-
dexed position. Pivot point at top of bedbar is grea-
seable.
Optimum Height
of Cut Range
Reel Speed: 1940 rpm (engine speed 2800 rpm).
3/16 to 5/16 in.
1/8 to 7/32 in.
Bedknife Screw Torque: 200 to 250 in-lb.
Reel Splined Drive Nut Torque: 40 to 60 ft-lbs.
Reel Bearing Rolling Torque: 7 in-lb. max.
Front or Rear Roller Run-Out: 0.014 in. max.
4. Pull rod studs
5. Grass shield
6. Reel
Page 8 - 3
7. Heignt of cut brackets (2)
8. Bedknife adjusting knob
Specifications