Product Overview; Controls - Toro 30605 Operator's Manual

Product Overview

Controls

Note: Determine the left and right sides of the machine
from the normal operating position.
Traction Pedal
To stop, reduce your foot pressure on the traction pedal and
allow it to return to the center position
1. Brake pedals
2. Pedal-locking latch
3. Parking-brake latch
4. Space for optional
accessory
5. Beacon switch (optional)
Brake Pedals
Two foot pedals (Figure 3) operate individual wheel brakes
to assist in turning, parking, and side-hill traction. A
latch connects the pedals for parking-brake operation and
transport.
Pedal-Locking Latch
The pedal-locking latch (Figure
together to engage the parking brake.
Tilt-Steering Lever
Press the lever (Figure 3) down to tilt the steering wheel
to the desired position. Then release the lever to lock the
adjustment.
(Figure 3).
9
10
g020756
Figure 3
6. Hazard-light switch
(optional)
7. Turn-signal switch
(optional)
8. Horn button (optional)
9. Traction pedal
10. Tilt-steering lever
3) connects the pedals
Parking-Brake Latch
A knob on the left side of the console actuates the
parking-brake lock (Figure
connect the pedals with the locking latch, push down on
both pedals, and pull the parking brake latch out. To release
the parking brake, press both pedals until the parking brake
latch retracts.
Hazard-Light Switch
Press the hazard-light switch
lights.
Turn-Signal Switch
Press the left side of the turn-signal switch
activate the left turn signal and the right side of the switch to
activate the right-turn signal. The center position is off.
Key Switch
The key switch (Figure
and Start.
3
4
5
6
7
1. Lift switches
2. PTO switch
3. Key switch
4. InfoCenter
PTO Switch
The PTO switch (Figure
(stop). Pull the PTO button out to engage the cutting-unit
blades. Push in the button to disengage the cutting-unit
blades.
Hi-Lo Speed Control
The switch (Figure 4) allows the speed range to increase for
transport of the machine. Cutting decks do not operate in
high range. To switch between the H
decks, engage the PTO, disengage the cruise control, move
16
3). To engage the parking brake,
(Figure 3) to activate the hazard
(Figure
4) has 3 positions: Off, On/Preheat,
2
1
Figure 4
5. H -L
I O SPEED
6. E -
NGINE SPEED
7. Light switch (optional)
4) has 2 positions: Out (start) and In
and L range, raise the
I O
3) to
g028453
control
switch