Maintenance; Recommended Maintenance Schedule(S); Water System Accumulator - Toro 09802 Operator's Manual

Maintenance

Note: Specifications and design are subject to change without notice.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 25 hours
After the first 50 hours
Before each use or daily
Every 100 hours
Every 200 hours
Every 400 hours

Water System Accumulator

Due to the operational requirements of the accumulator design, the high pressure internal gas pre-charge can bleed
out during periods of inactivity. Storing the Hydroject for extended periods of time (3 months or longer) and/or
seasonal temperature variances can affect the accumulators ability to retain a sufficient pre-charge and seasonal
servicing (recharge) may be required.
If one of the accumulator charge indicator lamps illuminates, contact your authorized Toro Distributor for
accumulator maintenance services.
Contact with hot surfaces could cause burns.
Wait for the machine to cool before servicing or making adjustments to the machine.
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug before you do any
maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
• Change the pump case oil
• Change the hydraulic oil and filter
• Change the pump oil
• Change the engine oil
• Check the engine oil.
• Check the gear case fluid level
• Check the pump case oil level
• Check the hydraulic lines and hoses
• Change the engine oil and filter
• Change the pump case oil
• Service the air cleaner elements
• Check the spark plugs Replace as required
• Change the hydraulic oil and filter
• Change the pump oil
• Adjust the parking brake
23