Toro 30411 Operator's Manual page 34

The grease fitting locations and quantities are:
Traction Unit
• Brake shaft pivot bearings (5) (Fig. 32)
• Traction pedal pivot bushing (1) (Fig. 33)
• Front and rear axle pivot bushings (2) (Fig. 34)
• Steering cylinder ball joints (2) (Fig. 35)
• Tie rod ball joints (2) (Fig. 35)
• King pin bushings (2) (Fig. 35). The top fitting on the
king pin should only be lubricated annually (2
pumps).
Figure 32
Figure 33
34
Figure 34
Figure 35