Adjusting The Focal Length; Controlling A Camera - Huawei TE40 User Manual

HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint
User Guide
Multi-view can be displayed in PiP (sub-pictures can be displayed in the top left corner, top right
corner, bottom left corner and bottom right corner), two-pane, and three-pane mode. The images
from any physical input ports (1 Main-IN or 2 PC-IN) can be chosen as sub-picture source, and
the input images can be the same, but the images from the remote site cannot be chosen.
The following prerequisites are required to select multi-view:
l
l
l
When the endpoint is not in use during a conference, you can control camera inputs for up to
two sub-pictures. (It is recommended to configure the pan-tilt-zoom (PTZ) settings for the
cameras and save them as presets.) When the endpoint is in use during a conference, you can
control the video input for sub-picture ① only.
To select and control multi-view:
Step 1 Press
Step 2 Press
Step 3 Press 1, 2, or 3 on the remote control to select the sub-picture you want to control.
The background of the selected sub-picture ID in the lower right corner is changed to blue. By
default, sub-picture ① is selected.
Step 4 Press the left and right arrow keys to adjust the camera angle.
----End

8.1.2 Adjusting the Focal Length

You can change the magnification of distant objects by adjusting the focal length of the camera.
Step 1 Select
Step 2 Select Adjust Focus and adjust the focal length.
----End

8.1.3 Controlling a Camera

You can control pan, tilt, and zoom (PTZ) actions for a local or remote camera.
Procedure
Step 1 Press
Step 2 On the camera control screen, perform any of the following:
l Press
l Press navigation keys on the remote control to turn the camera lens.
Issue 02 (2014-01-15)
Video source management has been enabled.
Serial ports have been configured.
Video Source is set to Multi-View under Advanced > Settings > Video > Common
Settings > Video Output.
on the remote control to switch to local camera mode.
on the remote control and select Multi-View.
.
on the remote control.
to toggle between local and remote cameras. The text in the upper left corner
indicates the camera that is currently being controlled (local or remote).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Controlling What You See
37