NetCol5000-C Chilled Water-Cooled In-Row Precision
Air Conditioner
User Manual
3.13.4 Connecting the Voltage Jumper
Before connecting the voltage jumper, verify that the voltage jumper matches the mains
voltage.
Ensure that the voltage labeled on the voltage jumper is the same as of the local power supply.
Then connect the two voltage jumpers.
3-23
Figure 3-26 Voltage jumper
3.13.5 Installing the Humidity and Temperature Sensor
You could remove the humidity and temperature sensor within the cabinet if you need to
measure the temperature and humidity outside the cabinet, as shown in
Figure 3-27 Removing the humidity and temperature sensor
Issue 02 (2013-12-10)
shows the interconnection position.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-26
shows the voltage jumpers. 4 in
3 Installation Guide
Figure
Figure
3-27.
43