Start And Shutdown - Huawei NetCol5000-C User Manual

NetCol5000-C Chilled Water-Cooled In-Row Precision
Air Conditioner
User Manual

5.6 Start and Shutdown

Tap the Start or Shutdown buttons on the home screen to start or shutdown the
NetCol5000-C.
Tap Start or Shutdown on the home screen. A warning is displayed, indicating whether to
start or shutdown the NetCol5000-C, as shown in
device is successfully started, the system displays a message, indicating that the command is
successfully triggered.
If a power failure occurs and the NetCol5000-C is powered on again, the NetCol5000-C
automatically restores to the original state (start or shutdown) before the power failure.
Figure 5-4 Starting the NetCol5000-C
Issue 02 (2013-12-10)
 The uppermost bar is the status bar, under which is the alarm bar.
 You can tap in the status bar to quickly mute the buzzer. Or, you can tap
If you are already in the alarm screen, the buzzer cannot be muted even if you tap
 You can tap
displays all active alarms.

in the status bar indicates that the display panel communicates properly with the main control
board. If is displayed in this position in the status bar, the communication fails.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
in the alarm bar to enter the active alarm screen to mute the buzzer.
. is changed to after the buzzer is muted.
in the alarm bar to enter the active alarm screen that
Figure 5-4
5 Controller Operate Guide
and Figure 5-5. Tap Yes. If the
57