Preparation - Blomberg KQD1360X Operating Instructions Manual

Hide thumbs Also See for KQD1360X:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
4

Preparation

Your refrigerator should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not be
located under direct sunlight.
The ambient temperature of the room
where you install your refrigerator
should at least be 10°C. Operating your
refrigerator under cooler conditions is
not recommended with regard to its
efficiency.
Please make sure that the interior of
your refrigerator is cleaned thoroughly.
If two refrigerators are to be installed
side by side, there should be at least 2
cm distance between them.
When you operate your refrigerator
for the first time, please observe the
following instructions during the initial
six hours.
The door should not be opened
frequently.
It must be operated empty without any
food in it.
Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings in
problems" section.
Original packaging and foam
materials should be kept for future
transportations or moving.
The baskets/drawers that are provided
with the chill compartment must always
be in use for low energy consumption
and for better storage conditions.
Food contact with the temperature
sensor in the freezer compartment may
increase energy consumption of the
appliance. Thus any contact with the
sensor(s) must be avoided.
In some models, the instrument panel
automatically turns off 5 minutes
after the door has closed. It will be
reactivated when the door has opened
or pressed on any key.
20
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents