Reset; Model Reset; Timer - Robitronic R01502 User Manual

2.20 RESET

2.21 MODEL RESET

This function will reset the data of the current model memory to default values.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/- Keys to select the M_RES function and press ENTER.
3. Use the +/- Keys to select YES
4. Press ENTER to reset the data
5. Press EXIT to save and return to FUNCTION MENU, press EXIT again to return to
the Main Screen

2.22 TIMER

Use the timer by selecting one of the two timers UP TIMER and DOWN TIMER and if
the MODE is INH, It will close the TIMER Function.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/-Keys to select the TIMER function and press "ENTER".
3. Press ENTER to select an item.
4. Use the +/- Keys to change the value
5. Press "EXIT" to save and return to FUNCTION MENU, press "EXIT" again to
return to the Main Screen
All the setting in the system will be reset to the
default values by this reset function. It takes about
30 seconds.
1. Press "ENTER" to see FUNCTION MENU.
2. Use the +/- Keys to select the RESET function
and press ENTER.
3. Press ENTER to reset the TL-3C memory.
4. Press "EXIT" twice to save and return to
FUNCTION MENU, press EXIT again to return to
the Main Screen.
23