Throttle Speed; Ats - Robitronic R01502 User Manual

• Quick steering operation will cause momentary under steering, loss of speed, of
spinning. This function is effective in such cases.
• This function limits the maximum speed of the steering servo. (Delay function)
• The steering speed when the steering wheel is operated (TURN direction) and
returned (RETN direction) can be independently set.
• If the steering wheel is turned slower than the set speed, the steering servo is not
affected.

Throttle Speed

• Sudden throttle trigger operation on a slippery road only causes the wheels to
spin and the vehicle cannot accelerate smoothly. Setting the throttle speed
function reduces wasteful battery consumption while at the same time
permitting smooth, enjoyable operation.
• Throttle servo (amp) operation is delayed so that the drive wheels will not spin
even if the throttle trigger is operated more than necessary. This delay function
is not performed when the throttle trigger is returned and at brake operation.
• - Adjustment:
• 1 .Select the TH button by +/- Keys.
• 2. Press Enter to select SPD. FL item.
• 3. Use +/- Keys change the value.
• 4. Press exit twice return to the function menu.
Terms
SPD.FL- SPEED FORWARD DELAY
SPD.Bk- SPEED BACKWARD DELAY Bereich: 0~100%, Standard: 0.

2.13 ATS

18
Bereich: 0~100%, Standard: 0.