7-3] Special Carrier Code - Panasonic KX-TDA100 Programming Manual

2.13.3 [7-3] Special Carrier Code

If the PBX has access to multiple telephone companies, a Special Carrier Access Code is required
each time a trunk call is made. By programming these Special Carrier Access Codes here, Toll
Restriction (TRS)/Call Barring (Barring) can restrict or allow calls to be made by ignoring the codes
and looking at the telephone number only. If a Special Carrier Access Code is found in the dialled
number, TRS/Barring will look only at the following digits.
A maximum of 20 (with the KX-TDA30/KX-TDA100/KX-TDA200) or 100 (with the KX-TDA600)
Special Carrier Access Codes can be programmed. With the KX-TDA600, 20 codes are displayed at
a time. To show other sets of codes, click the applicable tab.
Special Carrier Access Code
Specifies a Special Carrier Access Code. Special Carrier Access Codes and Host PBX Access codes
should be unique.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.13.3 [7-3] Special Carrier Code
Programming Manual References
None
Feature Guide References
1.5.4.9 Special Carrier Access Code
1.9.1 Toll Restriction (TRS)/Call Barring (Barring)
2.13 [7] TRS
PC Programming Manual 723