2.16 [10] CO & Incoming Call
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
DDI / DID Destination—Day, Lunch, Break, Night
Specifies the DDI/DID destination in each time mode.
Value Range
For KX-TDA30/KX-TDA100/KX-TDA200:
Max. 4 digits (consisting of 0–9): For an extension number at the local PBX
Max. 5 digits (consisting of 0–9): For an extension number at a remote PBX
For KX-TDA600:
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.16.3 [10-3] DDI / DID Table
Programming Manual References
2.8.8 [2-6-1] Numbering Plan—Main
2.16.4 [10-3] DDI/DID Table—Automatic Registration
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.30.1 TIE Line Service
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending
on the time of day.
Value Range
1–8
Maintenance Console Location
2.16.3 [10-3] DDI / DID Table
Programming Manual References
2.8.5 [2-4] Week Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
VM Trunk Group No.
Specifies the number of the VPS trunk group sent to the VPS when the DID destination is the floating
extension number of a VM (DPT) Group.
The VPS trunk group number is used to allow the VPS to send the applicable greeting message to
the caller.
762
PC Programming Manual