Panasonic KX-TDA100 Programming Manual page 339

Value Range
Disable, Enable
Maintenance Console Location
2.7.46 [1-3] Option
Programming Manual References
None
Feature Guide References
None
New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Specifies whether a PRI23 card is automatically set to ISDN Standard mode or T1-LCOT mode when
it is installed for the first time.
Value Range
ISDN Standard mode: The CCBS, CF, CT, and Centralised VM features are supported. DIL and DID
call distribution are available for the D channel.
T1-LCOT mode: DIL and DID call distribution are available for all 23B channels. The CCBS, CF, CT,
and Centralised VM features are not available in this mode.
Maintenance Console Location
2.7.46 [1-3] Option
Programming Manual References
None
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.30.4.3 Call Forwarding (CF)—by QSIG
1.30.4.4 Call Transfer (CT)—by QSIG
1.30.4.5 Completion of Calls to Busy Subscriber (CCBS)—by QSIG
1.30.5.2 Centralised Voice Mail
2.7 [1] Configuration
PC Programming Manual 339