Authorisation Code for Tenant
Specifies an Authorisation code for each tenant. The Authorisation codes can be added to the user-
dialled number by specifying "A" command in Modify Command on the Carrier tab.
Authorisation Code for Tenant—Tenant 1–Tenant 8
Specifies the Authorisation code of each carrier for each tenant.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.14.6 [8-5] Carrier
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
2.2.3 Tenant Service
2.14 [8] ARS
PC Programming Manual
735