Panasonic KX-TDA100 Programming Manual page 435

Programming Manual References
None
Feature Guide References
None
ISDN en Bloc Dial—[#] as End of Dial for en Bloc mode
Specifies whether to automatically send "#" as an end code when dialling to an ISDN line; if used as
the end code, "#" will not be dialled out as part of a number even when the "#" key is pressed.
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.7.14 [1-1] Slot—BRI Port—ISDN CO—ISDN Outgoing Call Type
2.7.16 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—ISDN
Outgoing Call Type
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
Redial—Automatic Redial when No Answer (ISDN)
Selects whether Automatic Redial to an ISDN line is performed when the called party does not
answer within a preprogrammed time period.
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.8.4 [2-3] Timers & Counters—Automatic Redial—Redial Call Ring Duration
Feature Guide References
1.6.1.4 Last Number Redial
Redial—Automatic Redial for Analogue CO
Selects whether Automatic Redial to an analogue CO line is performed when the called party does
not answer within a preprogrammed time period.
2.8 [2] System
PC Programming Manual 435